Logo Nav_divider_new
Prosciutto-Wrapped Cherry-Stuffed Chicken
Dsc_0022_thumb
Description

What says delicious more than Prosciutto-Wrapped Cherry-Stuffed Chicken? We'll also be making a fruity spinach side salad and attempting sweet potato fries.

In addition to dinner, participants will leave with an additional stuffed chicken breast and we'll split the reminder of the sides so bring a Tupperware container or two!

Feel free to BYOB and we'll also have a bottle of wine.

Organizer
Photo_small

Co-founder @HourSchool. Alumni @ac4d. Holler @rubyku!

Comments

Please first sign up or log in to leave a comment

Avatar
tony121
about 1 month ago

Contact us for more details about SKF 7405 BGAM bearing

After shaft seizure occurs, the reasons can be found from several aspects:

①Whether there is oil leakage in the grinding head.

②Whether the oil pool is short of oil, and whether the oil level is lower than the indicator line on the oil mark. There is a kind of flat grinding lubricating oil which is prepared with kerosene, which is volatile. When the grinder is in normal use, the operator should always pay attention to the oil mark. When the lubricating oil in the grinding head is lower than the indicator line on the oil mark, add lubricating oil in time.

③ Before assembling the grinding head, the grinder manufacturer must check the ovality of the inner hole of the oil ring (ovality≤0.05mm) and whether the 16 5mm holes on the oil ring are evenly distributed. The oil ring is sleeved on the main shaft, the inner circle of the oil ring is close to the outer circle of the main shaft, and the lower end of the oil ring is placed under the oil surface. When the main shaft rotates, the oil ring is driven to rotate synchronously by static friction. When the ellipse of the inner hole of the oil ring is too large, the contact surface between the main shaft and the oil ring will be large and small, or even not in contact, so the friction force will be large and small, or even without friction, causing the oil ring to rotate quickly and slowly , The oil supply is normal and abnormal momentarily and the shaft is hung.

(3) The lubricating oil of the grinding head sliding bearing does not meet the specified requirements. There are two types of lubricating oil for flat grinding heads: one is N7/GB3141 machine oil, and the other is 1 part of N23 machine oil and 9 parts of kerosene. Some users purchase new flat grinders and directly inject other types of mechanical oil without reading the instruction manual, which causes the shaft to lock.

(4) The radial clearance between the main shaft and the sliding bearing is too small, the lubricating oil is not easy to input, and the temperature rise between the main shaft and the sliding bearing is too high, resulting in the shaft holding.

(5) The scraping method of the sliding bearing is incorrect, and the contact point does not meet the requirements. Incorrect scraping method of sliding bearing, uneven contact points or too few contact points will make the bearing oil film unstable and poor oil film rigidity. If the grinding wheel is being ground, it is easy to cause shaft holding.

(6) The coaxiality of the rear bearing seat and the grinding head body and the perpendicularity of the end surface, as well as the deviation of the parallelism of the outer spacer between the two rolling bearings, and the inner spacer are too large. When this happens, the front end of the spindle, that is, the cone of the spindle contacting the grinding wheel chuck, has a relatively large runout. When the spindle is rotating, the runout and position of the spindle cone are extremely unstable and fluctuate. In fact, this is a superficial phenomenon, which reflects that the spindle axis is drifting and unstable, which leads to unstable bearing oil film and poor oil film rigidity. If the grinding wheel is grinding, it is very easy to produce shaft holding.

(7) The vertical feed is too large, and the cutting is overloaded. At this time, the speed of the grinding wheel decreases, the rigidity of the bearing oil film decreases, and non-liquid friction is formed between the main shaft and the sliding bearing, which eventually causes the shaft to hold. There are many factors for flat grinding heads to hold the shaft. When looking for the cause of the shaft, you must not grasp the point and eliminate the fault from multiple perspectives and all-round.

Please first sign up or log in to leave a comment

Avatar
bellaer
10 months ago

Wonderful illustrated information. I thank you about that. No doubt it will be very useful for my future projects. Would like to see some other posts on the same subject!you will get to know everything on this supplement. Keep reading until the end.Good post, Thanks for sharing.FAG 23130EAS.M bearing online

Please first sign up or log in to leave a comment

Avatar
rossase john
over 1 year ago

What’s more fun than Prosciutto-Wrapped Cherry-Stuffed Chicken? I can write about uk essay writing services now. We will make a fruit salad, you will have a meal. In addition to dinner, the participants will go out with a packed chicken breast, and we will be sharing a side note so bring a Tupperware bag or two!

Please first sign up or log in to leave a comment

Please first sign up or log in to leave a comment